[#1169] LPRO Magic Hello Bypass iOS 15/16.5 Without Network(A11 Devices iPhone 8,8+/X)

Please Read Before Order:

Service is For Advance Technician only,If You Encountered Any Error Using this Tool Please wait for the Dev Team to Fixed,Always choose the right Models For your Device to avoid Any errors,No Force Cancellation is allowed,refund takes 24-48 hours for not supported Devices

Copy from soft ECID start with 0x must be 18 characters and put in device field

Instruction:

NEW UPDATE DOESNT REQUIRE DCSD - NO NEED DCSD for A10/A11 Devices Only

Guide (AUTO METHOD ONLY) :

Step 1: Connect Device in "RECOVERY MODE"

Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)

Step 3: Click "Purple Mode" Button

This Step NO NEED DCSD for iPhone 7-X (A10/A11)

DCSD for iPads and iPhone 6s, 6s Plus Needed

After Successful Write, Device Automatically Enters Recovery Mode

Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)

Step 5: Click "Run PwnDFU" Button

Step 6: Click "Boot Device" Button

Step 7: Click "Check SSH"

(Wait for the Button to light up to become this Check SSH ✔️)

Step 8: Click "HELLO BYPASS"

Wait for the Device to turn on and the Device is Successfully Activated

—————————————————————

Guide (MANUAL METHOD ONLY) :

Step 1: Connect Device in "NORMAL MODE"

It Will Show Serial To Change Manually

Step 2: Connect Device in "RECOVERY MODE"

Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)

Step 4: Click "Purple Mode" Button

You Can Connect DCSD Now and Click OK or Click Close.

Click Close and Connect DCSD Cable for Manual Methods

Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1

PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.

Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)

This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.

Step 7: Connect Device in "RECOVERY MODE"

Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)

Step 9: Click "Run PwnDFU" Button

Step 10: Click "Boot Device" Button

Step 11: Click "Check SSH"

(Wait for the Button to light up to become this Check SSH ✔️)

Step 12: Click "HELLO BYPASS"

Download Tool

DELIVERY TIME : instant